|
| | sa1.1m | See sar.1m |
| | sa2.1m | See sar.1m |
| | sac.1m | service access controller |
| | sacadm.1m | service access controller administration |
| | sact.1 | See sccs-sact.1 |
| | sad.7d | STREAMS Administrative Driver |
| | sadc.1m | See sar.1m |
| | sadmind.1m | distributed system administration daemon |
| | saf.1m | Service Access Facility |
| | sag.1 | system activity graph |
| | SAMESTR.9f | test if next queue is in the same stream |
| | samestr.9f | See SAMESTR.9f |
| | sar.1m | system activity report package |
| | sar.1 | system activity reporter |
| | savecore.1m | save a crash dump of the operating system |
| | savetty.3curses | See curs_kernel.3curses |
| | savetty.3xcurses | See resetty.3xcurses |
| | sbpro.7d | Sound Blaster Pro, Sound Blaster 16, and Sound Blaster AWE32 audio device driver |
| | sbrk.2 | See brk.2 |
| | sbus.4 | configuration files for SBus device drivers |
| | scadm.1m | administer System Controller (SC) |
| | scalb.3m | load exponent of a radix-independent floating-point number |
| | scalbn.3m | load exponent of a radix-independent floating-point number |
| | scale_form.3curses | See form_win.3curses |
| | scale_menu.3curses | See menu_win.3curses |
| | scandir.3ucb | scan a directory |
| | scanf.3c | convert formatted input |
| | scanw.3curses | See curs_scanw.3curses |
| | scanw.3xcurses | See mvscanw.3xcurses |
| | sccs.1 | front end for the Source Code Control System (SCCS) |
| | sccs-admin.1 | create and administer SCCS history files |
| | sccs-cdc.1 | change the delta commentary of an SCCS delta |
| | sccs-comb.1 | combine SCCS deltas |
| | sccs-delta.1 | make a delta to an SCCS file |
| | sccsdiff.1 | See sccs-sccsdiff.1 |
| | sccsfile.4 | format of an SCCS history file |
| | sccs-get.1 | retrieve a version of an SCCS file |
| | sccs-help.1 | ask for help regarding SCCS error or warning messages |
| | sccs-prs.1 | display selected portions of an SCCS history |
| | sccs-prt.1 | display delta table information from an SCCS file |
| | sccs-rmdel.1 | remove a delta from an SCCS file |
| | sccs-sact.1 | show editing activity status of an SCCS file |
| | sccs-sccsdiff.1 | compare two versions of an SCCS file |
| | sccs-unget.1 | undo a previous get of an SCCS file |
| | sccs-val.1 | validate an SCCS file |
| | SCF_Card_close.3smartcard | See SCF_Session_close.3smartcard |
| | SCF_Card_exchangeAPDU.3smartcard | send a command APDU to a card and read the card's response |
| | SCF_Card_freeInfo.3smartcard | See SCF_Session_freeInfo.3smartcard |
| | SCF_Card_getInfo.3smartcard | See SCF_Session_getInfo.3smartcard |
| | SCF_Card_lock.3smartcard | perform mutex locking on a card |
| | SCF_Card_reset.3smartcard | perform a reset of a smartcard |
| | SCF_Card_unlock.3smartcard | See SCF_Card_lock.3smartcard |
| | SCF_Card_waitForCardRemoved.3smartcard | See SCF_Terminal_waitForCardPresent.3smartcard |
| | SCF_Session_close.3smartcard | close a smartcard session, terminal, or card |
| | SCF_Session_freeInfo.3smartcard | deallocate information storage |
| | SCF_Session_getInfo.3smartcard | retrieve information about a session, terminal, or card |
| | SCF_Session_getSession.3smartcard | establish a context with a system's smartcard framework |
| | SCF_Session_getTerminal.3smartcard | establish a context with a smartcard terminal (reader) |
| | SCF_strerror.3smartcard | get a string describing a status code |
| | SCF_Terminal_addEventListener.3smartcard | receive asychronous event notification |
| | SCF_Terminal_close.3smartcard | See SCF_Session_close.3smartcard |
| | SCF_Terminal_freeInfo.3smartcard | See SCF_Session_freeInfo.3smartcard |
| | SCF_Terminal_getCard.3smartcard | establish a context with a smartcard |
| | SCF_Terminal_getInfo.3smartcard | See SCF_Session_getInfo.3smartcard |
| | SCF_Terminal_removeEventListener.3smartcard | See SCF_Terminal_addEventListener.3smartcard |
| | SCF_Terminal_updateEventListener.3smartcard | See SCF_Terminal_addEventListener.3smartcard |
| | SCF_Terminal_waitForCardAbsent.3smartcard | See SCF_Terminal_waitForCardPresent.3smartcard |
| | SCF_Terminal_waitForCardPresent.3smartcard | wait for a card to be inserted or removed |
| | sched.3head | execution scheduling |
| | schedctl_exit.3sched | See schedctl_init.3sched |
| | schedctl_init.3sched | preemption control |
| | schedctl_lookup.3sched | See schedctl_init.3sched |
| | schedctl_start.3sched | See schedctl_init.3sched |
| | schedctl_stop.3sched | See schedctl_init.3sched |
| | sched_getparam.3rt | get scheduling parameters |
| | sched_get_priority_max.3rt | get scheduling parameter limits |
| | sched_get_priority_min.3rt | See sched_get_priority_max.3rt |
| | sched_getscheduler.3rt | get scheduling policy |
| | sched_rr_get_interval.3rt | get execution time limits |
| | sched_setparam.3rt | set scheduling parameters |
| | sched_setscheduler.3rt | set scheduling policy and scheduling parameters |
| | sched_yield.3rt | yield processor |
| | sckmd.1m | Sun Fire High-End system key management daemon |
| | scman.7d | SUNW,scman Sun Fire high end server management network device driver |
| | scmi2c.7d | Smart Transporter chip device driver |
| | sc_nct.7d | NetraCT-40/60 system management controller (SMC) I2C nexus driver |
| | scp.1 | secure copy (remote file copy program) |
| | scr_dump.3curses | See curs_scr_dump.3curses |
| | scr_dump.3xcurses | write screen contents to/from a file |
| | scr_init.3curses | See curs_scr_dump.3curses |
| | scr_init.3xcurses | See scr_dump.3xcurses |
| | script.1 | make record of a terminal session |
| | scrl.3curses | See curs_scroll.3curses |
| | scrl.3xcurses | scroll a window |
| | scroll.3curses | See curs_scroll.3curses |
| | scroll.3xcurses | See scrl.3xcurses |
| | scrollok.3curses | See curs_outopts.3curses |
| | scrollok.3xcurses | See clearok.3xcurses |
| | scr_restore.3curses | See curs_scr_dump.3curses |
| | scr_restore.3xcurses | See scr_dump.3xcurses |
| | scr_set.3curses | See curs_scr_dump.3curses |
| | scr_set.3xcurses | See scr_dump.3xcurses |
| | scsa2usb.7d | SCSI to USB bridge driver |
| | scsi.4 | configuration files for SCSI target drivers |
| | scsi_abort.9f | abort a SCSI command |
| | scsi_address.9s | SCSI address structure |
| | scsi_alloc_consistent_buf.9f | allocate an I/O buffer for SCSI DMA |
| | scsi_arq_status.9s | SCSI auto request sense structure |
| | scsi_asc_key_strings.9s | SCSI ASC ASCQ to message structure |
| | scsi_cname.9f | decode a SCSI name |
| | scsi_destroy_pkt.9f | free an allocated SCSI packet and its DMA resource |
| | scsi_device.9s | SCSI device structure |
| | scsi_dmafree.9f | See scsi_dmaget.9f |
| | scsi_dmaget.9f | SCSI dma utility routines |
| | scsi_dname.9f | See scsi_cname.9f |
| | scsi_errmsg.9f | display a SCSI request sense message |
| | scsi_extended_sense.9s | SCSI extended sense structure |
| | scsi_free_consistent_buf.9f | free a previously allocated SCSI DMA I/O buffer |
| | scsi_get_device_type_scsi_options.9f | look up per-device-type scsi-options property |
| | scsi_hba_attach.9f | See scsi_hba_attach_setup.9f |
| | scsi_hba_attach_setup.9f | SCSI HBA attach and detach routines |
| | scsi_hba_detach.9f | See scsi_hba_attach_setup.9f |
| | scsi_hba_fini.9f | See scsi_hba_init.9f |
| | scsi_hba_init.9f | SCSI Host Bus Adapter system initialization and completion routines |
| | scsi_hba_lookup_capstr.9f | return index matching capability string |
| | scsi_hba_pkt_alloc.9f | allocate and free a scsi_pkt structure |
| | scsi_hba_pkt_free.9f | See scsi_hba_pkt_alloc.9f |
| | scsi_hba_probe.9f | default SCSI HBA probe function |
| | scsi_hba_tran.9s | SCSI Host Bus Adapter (HBA) driver transport vector structure |
| | scsi_hba_tran_alloc.9f | allocate and free transport structures |
| | scsi_hba_tran_free.9f | See scsi_hba_tran_alloc.9f |
| | scsi_ifgetcap.9f | get/set SCSI transport capability |
| | scsi_ifsetcap.9f | See scsi_ifgetcap.9f |
| | scsi_init_pkt.9f | prepare a complete SCSI packet |
| | scsi_inquiry.9s | SCSI inquiry structure |
| | scsi_log.9f | display a SCSI-device-related message |
| | scsi_mname.9f | See scsi_cname.9f |
| | scsi_pkt.9s | SCSI packet structure |
| | scsi_pktalloc.9f | SCSI packet utility routines |
| | scsi_pktfree.9f | See scsi_pktalloc.9f |
| | scsi_poll.9f | run a polled SCSI command on behalf of a target driver |
| | scsi_probe.9f | utility for probing a scsi device |
| | scsi_resalloc.9f | See scsi_pktalloc.9f |
| | scsi_reset.9f | reset a SCSI bus or target |
| | scsi_reset_notify.9f | notify target driver of bus resets |
| | scsi_resfree.9f | See scsi_pktalloc.9f |
| | scsi_rname.9f | See scsi_cname.9f |
| | scsi_setup_cdb.9f | setup SCSI command descriptor block (CDB) |
| | scsi_slave.9f | utility for SCSI target drivers to establish the presence of a target |
| | scsi_sname.9f | See scsi_cname.9f |
| | scsi_status.9s | SCSI status structure |
| | scsi_sync_pkt.9f | synchronize CPU and I/O views of memory |
| | scsi_transport.9f | request by a SCSI target driver to start a command |
| | scsi_unprobe.9f | free resources allocated during initial probing |
| | scsi_unslave.9f | See scsi_unprobe.9f |
| | scsi_vhci.7d | SCSI virtual host controller interconnect driver |
| | scsi_vu_errmsg.9f | display a SCSI request sense message |
| | sd.7d | SCSI disk and ATAPI/SCSI CD-ROM device driver |
| | sdiff.1 | print differences between two files side-by-side |
| | se.7d | Siemens 82532 ESCC serial communications driver |
| | SEAM.5 | overview of Sun Enterprise Authentication Mechanism |
| | seconvert.3c | See econvert.3c |
| | securenets.4 | configuration file for NIS security |
| | secure_rpc.3nsl | library routines for secure remote procedure calls |
| | sed.1b | stream editor |
| | sed.1 | stream editor |
| | seed48.3c | See drand48.3c |
| | seekdir.3c | set position of directory stream |
| | segmap.9e | map device memory into user space |
| | se_hdlc.7d | on-board high-performance serial HDLC interface |
| | select.1 | See shell_builtins.1 |
| | select.3c | synchronous I/O multiplexing |
| | sema_destroy.3thr | See semaphore.3thr |
| | sema_destroy.9f | See semaphore.9f |
| | sema_init.3thr | See semaphore.3thr |
| | sema_init.9f | See semaphore.9f |
| | sema_p.9f | See semaphore.9f |
| | semaphore.3thr | semaphores |
| | semaphore.9f | semaphore functions |
| | sema_post.3thr | See semaphore.3thr |
| | sema_p_sig.9f | See semaphore.9f |
| | sema_tryp.9f | See semaphore.9f |
| | sema_trywait.3thr | See semaphore.3thr |
| | sema_v.9f | See semaphore.9f |
| | sema_wait.3thr | See semaphore.3thr |
| | sem_close.3rt | close a named semaphore |
| | semctl.2 | semaphore control operations |
| | sem_destroy.3rt | destroy an unnamed semaphore |
| | semget.2 | get set of semaphores |
| | sem_getvalue.3rt | get the value of a semaphore |
| | semids.2 | discover all semaphore identifiers |
| | sem_init.3rt | initialize an unnamed semaphore |
| | semop.2 | semaphore operations |
| | sem_open.3rt | initialize/open a named semaphore |
| | sem_post.3rt | increment the count of a semaphore |
| | semtimedop.2 | See semop.2 |
| | sem_trywait.3rt | See sem_wait.3rt |
| | sem_unlink.3rt | remove a named semaphore |
| | sem_wait.3rt | acquire or wait for a semaphore |
| | send.3socket | send a message from a socket |
| | send.3xnet | send a message on a socket |
| | sendfile.3ext | send files over sockets or copy files to files |
| | sendfilev.3ext | send a file |
| | sendmail.1m | send mail over the internet |
| | sendmsg.3socket | See send.3socket |
| | sendmsg.3xnet | send a message on a socket using a message structure |
| | sendto.3socket | See send.3socket |
| | sendto.3xnet | send a message on a socket |
| | services.4 | Internet services and aliases |
| | ses.7d | SCSI enclosure services device driver |
| | sesio.7i | enclosure services device driver interface |
| | set.1f | set and unset local or global environment variables |
| | set.1 | shell built-in functions to determine the characteristics for environmental variables of the current shell and its descendents |
| | setac.3bsm | See getacinfo.3bsm |
| | setauclass.3bsm | See getauclassent.3bsm |
| | setaudit.2 | See getaudit.2 |
| | setaudit_addr.2 | See getaudit.2 |
| | setauevent.3bsm | See getauevent.3bsm |
| | setauid.2 | See getauid.2 |
| | setauthattr.3secdb | See getauthattr.3secdb |
| | setauuser.3bsm | See getauusernam.3bsm |
| | setbuf.3c | assign buffering to a stream |
| | setbuffer.3c | assign buffering to a stream |
| | setcat.3c | define default catalog |
| | setcchar.3xcurses | set a cchar_t type character from a wide character and rendition |
| | setcolor.1f | redefine or create a color |
| | setcontext.2 | See getcontext.2 |
| | set_current_field.3curses | See form_page.3curses |
| | set_current_item.3curses | See menu_item_current.3curses |
| | set_curterm.3curses | See curs_terminfo.3curses |
| | set_curterm.3xcurses | See del_curterm.3xcurses |
| | setddent.3bsm | See getddent.3bsm |
| | setddfile.3bsm | See getddent.3bsm |
| | setdmapent.3bsm | See getdmapent.3bsm |
| | setdmapfile.3bsm | See getdmapent.3bsm |
| | setegid.2 | See setuid.2 |
| | setenv.1 | See set.1 |
| | seteuid.2 | See setuid.2 |
| | setexecattr.3secdb | See getexecattr.3secdb |
| | setfacl.1 | modify the Access Control List (ACL) for a file or files |
| | set_field_back.3curses | See form_field_attributes.3curses |
| | set_field_buffer.3curses | See form_field_buffer.3curses |
| | set_field_fore.3curses | See form_field_attributes.3curses |
| | set_field_init.3curses | See form_hook.3curses |
| | set_field_just.3curses | See form_field_just.3curses |
| | set_field_opts.3curses | See form_field_opts.3curses |
| | set_field_pad.3curses | See form_field_attributes.3curses |
| | set_field_status.3curses | See form_field_buffer.3curses |
| | set_field_term.3curses | See form_hook.3curses |
| | set_field_type.3curses | See form_field_validation.3curses |
| | set_fieldtype_arg.3curses | See form_fieldtype.3curses |
| | set_fieldtype_choice.3curses | See form_fieldtype.3curses |
| | set_field_userptr.3curses | See form_field_userptr.3curses |
| | set_form_fields.3curses | See form_field.3curses |
| | set_form_init.3curses | See form_hook.3curses |
| | set_form_opts.3curses | See form_opts.3curses |
| | set_form_page.3curses | See form_page.3curses |
| | set_form_sub.3curses | See form_win.3curses |
| | set_form_term.3curses | See form_hook.3curses |
| | set_form_userptr.3curses | See form_userptr.3curses |
| | set_form_win.3curses | See form_win.3curses |
| | setgid.2 | See setuid.2 |
| | setgrent.3c | See getgrnam.3c |
| | setgroups.2 | See getgroups.2 |
| | sethostent.3nsl | See gethostbyname.3nsl |
| | sethostent.3xnet | See endhostent.3xnet |
| | sethostname.3c | See gethostname.3c |
| | set_item_init.3curses | See menu_hook.3curses |
| | set_item_opts.3curses | See menu_item_opts.3curses |
| | set_item_term.3curses | See menu_hook.3curses |
| | set_item_userptr.3curses | See menu_item_userptr.3curses |
| | set_item_value.3curses | See menu_item_value.3curses |
| | setitimer.2 | See getitimer.2 |
| | setjmp.3c | non-local goto |
| | _setjmp.3c | See _longjmp.3c |
| | setjmp.3ucb | non-local goto |
| | _setjmp.3ucb | See setjmp.3ucb |
| | setkey.3c | set encoding key |
| | setlabel.3c | define the label for pfmt and lfmt |
| | setlinebuf.3c | See setbuffer.3c |
| | setlocale.3c | modify and query a program's locale |
| | setlogmask.3c | See syslog.3c |
| | set_max_field.3curses | See form_field_buffer.3curses |
| | set_menu_back.3curses | See menu_attributes.3curses |
| | set_menu_fore.3curses | See menu_attributes.3curses |
| | set_menu_format.3curses | See menu_format.3curses |
| | set_menu_grey.3curses | See menu_attributes.3curses |
| | set_menu_init.3curses | See menu_hook.3curses |
| | set_menu_items.3curses | See menu_items.3curses |
| | set_menu_mark.3curses | See menu_mark.3curses |
| | set_menu_opts.3curses | See menu_opts.3curses |
| | set_menu_pad.3curses | See menu_attributes.3curses |
| | set_menu_pattern.3curses | See menu_pattern.3curses |
| | set_menu_sub.3curses | See menu_win.3curses |
| | set_menu_term.3curses | See menu_hook.3curses |
| | set_menu_userptr.3curses | See menu_userptr.3curses |
| | set_menu_win.3curses | See menu_win.3curses |
| | setnetconfig.3nsl | See getnetconfig.3nsl |
| | setnetent.3socket | See getnetbyname.3socket |
| | setnetent.3xnet | See endnetent.3xnet |
| | setnetgrent.3c | See getnetgrent.3c |
| | setnetpath.3nsl | See getnetpath.3nsl |
| | set_new_page.3curses | See form_new_page.3curses |
| | set_panel_userptr.3curses | See panel_userptr.3curses |
| | setpgid.2 | set process group ID |
| | setpgrp.1 | set process group ID |
| | setpgrp.2 | set process group ID |
| | setpriority.3c | See getpriority.3c |
| | setprofattr.3secdb | See getprofattr.3secdb |
| | setproject.3project | place process in new project with attendant resource controls, resource pools, and attributes |
| | setprojent.3project | See getprojent.3project |
| | setprotoent.3socket | See getprotobyname.3socket |
| | setprotoent.3xnet | See endprotoent.3xnet |
| | setpwent.3c | See getpwnam.3c |
| | setrctl.2 | set or get resource control values |
| | setregid.2 | set real and effective group IDs |
| | setreuid.2 | set real and effective user IDs |
| | setrlimit.2 | See getrlimit.2 |
| | setrpcent.3nsl | See getrpcbyname.3nsl |
| | setscrreg.3curses | See curs_outopts.3curses |
| | setscrreg.3xcurses | See clearok.3xcurses |
| | setservent.3socket | See getservbyname.3socket |
| | setservent.3xnet | See endservent.3xnet |
| | setsid.2 | create session and set process group ID |
| | setsockopt.3socket | See getsockopt.3socket |
| | setsockopt.3xnet | set the socket options |
| | setspent.3c | See getspnam.3c |
| | setstate.3c | See random.3c |
| | setsyx.3curses | See curs_kernel.3curses |
| | settaskid.2 | set or get task or project IDs |
| | set_term.3curses | See curs_initscr.3curses |
| | setterm.3curses | See curs_terminfo.3curses |
| | set_term.3xcurses | switch between terminals |
| | settime.1 | See touch.1 |
| | settimeofday.3c | See gettimeofday.3c |
| | settimeofday.3ucb | See gettimeofday.3ucb |
| | set_top_row.3curses | See menu_item_current.3curses |
| | setuid.2 | set user and group IDs |
| | setuname.1m | change machine information |
| | setup_install_server.1m | See install_scripts.1m |
| | setupterm.3curses | See curs_terminfo.3curses |
| | setupterm.3xcurses | See del_curterm.3xcurses |
| | setuserattr.3secdb | See getuserattr.3secdb |
| | setusershell.3c | See getusershell.3c |
| | setustack.2 | See getustack.2 |
| | setutent.3c | See getutent.3c |
| | setutxent.3c | See getutxent.3c |
| | setvbuf.3c | See setbuf.3c |
| | sf.7d | SOC+ FC-AL FCP Driver |
| | sf880drd.1m | Sun Fire 880 Dynamic Reconfiguration daemon |
| | sfconvert.3c | See econvert.3c |
| | sftp.1 | secure file transfer program |
| | sftp-server.1m | SFTP server subsystem |
| | sgconvert.3c | See econvert.3c |
| | sgen.7d | Generic SCSI device driver |
| | sgml.5 | Standard Generalized Markup Language |
| | sh.1 | standard and job control shell and command interpreter |
| | shadow.4 | shadow password file |
| | share.1m | make local resource available for mounting by remote systems |
| | shareall.1m | share, unshare multiple resources |
| | share_nfs.1m | make local NFS file systems available for mounting by remote systems |
| | sharetab.4 | shared file system table |
| | shell.1f | run a command using shell |
| | shell_builtins.1 | shell command interpreter built-in commands |
| | shells.4 | shell database |
| | shift.1 | shell built-in function to traverse either a shell's argument list or a list of field-separated words |
| | shmat.2 | See shmop.2 |
| | shmctl.2 | shared memory control operations |
| | shmdt.2 | See shmop.2 |
| | shmget.2 | get shared memory segment identifier |
| | shmids.2 | discover all shared memory identifiers |
| | shmop.2 | shared memory operations |
| | shm_open.3rt | open a shared memory object |
| | shm_unlink.3rt | remove a shared memory object |
| | showmount.1m | show all remote mounts |
| | show_panel.3curses | See panel_show.3curses |
| | showrev.1m | show machine, software revision, and patch revision information |
| | shutacct.1m | See acctsh.1m |
| | shutdown.1b | close down the system at a given time |
| | shutdown.1m | shut down system, change system state |
| | shutdown.3socket | shut down part of a full-duplex connection |
| | shutdown.3xnet | shut down socket send and receive operations |
| | sig2str.3c | See str2sig.3c |
| | sigaction.2 | detailed signal management |
| | sigaddset.3c | See sigsetops.3c |
| | sigaltstack.2 | set or get signal alternate stack context |
| | sigblock.3ucb | block signals |
| | sigdelset.3c | See sigsetops.3c |
| | sigemptyset.3c | See sigsetops.3c |
| | sigfillset.3c | See sigsetops.3c |
| | sigfpe.3c | signal handling for specific SIGFPE codes |
| | sighold.3c | See signal.3c |
| | sigignore.3c | See signal.3c |
| | siginfo.3head | signal generation information |
| | siginterrupt.3ucb | allow signals to interrupt functions |
| | sigismember.3c | See sigsetops.3c |
| | siglongjmp.3c | See setjmp.3c |
| | sigmask.3ucb | See sigblock.3ucb |
| | signal.3c | simplified signal management for application processes |
| | signal.3head | base signals |
| | signal.3ucb | simplified software signal facilities |
| | significand.3m | significand function |
| | sigpause.3c | See signal.3c |
| | sigpause.3ucb | See sigblock.3ucb |
| | sigpending.2 | examine signals that are blocked and pending |
| | sigprocmask.2 | change and/or examine caller's signal mask |
| | sigqueue.3rt | queue a signal to a process |
| | sigrelse.3c | See signal.3c |
| | sigsend.2 | send a signal to a process or a group of processes |
| | sigsendset.2 | See sigsend.2 |
| | sigset.3c | See signal.3c |
| | sigsetjmp.3c | See setjmp.3c |
| | sigsetmask.3ucb | See sigblock.3ucb |
| | sigsetops.3c | manipulate sets of signals |
| | sigstack.3c | set and/or get alternate signal stack context |
| | sigstack.3ucb | set and/or get signal stack context |
| | sigsuspend.2 | install a signal mask and suspend caller until signal |
| | sigtimedwait.3rt | See sigwaitinfo.3rt |
| | sigvec.3ucb | software signal facilities |
| | sigwait.2 | wait until a signal is posted |
| | sigwaitinfo.3rt | wait for queued signals |
| | sin.3m | sine function |
| | single_to_decimal.3c | See floating_to_decimal.3c |
| | sinh.3m | hyperbolic sine function |
| | size.1 | print section sizes in bytes of object files |
| | SIZEOF_PTR.9f | See STRUCT_DECL.9f |
| | SIZEOF_STRUCT.9f | See STRUCT_DECL.9f |
| | sk98sol.7d | SysKonnect Gigabit Ethernet SK-98xx device driver |
| | skfp.7d | SysKonnect FDDI PCI device driver |
| | sleep.1 | suspend execution for an interval |
| | sleep.3c | suspend execution for an interval of time |
| | sleep.3ucb | suspend execution for interval |
| | slk_attroff.3curses | See curs_slk.3curses |
| | slk_attroff.3xcurses | soft label functions |
| | slk_attr_off.3xcurses | See slk_attroff.3xcurses |
| | slk_attron.3curses | See curs_slk.3curses |
| | slk_attr_on.3xcurses | See slk_attroff.3xcurses |
| | slk_attron.3xcurses | See slk_attroff.3xcurses |
| | slk_attrset.3curses | See curs_slk.3curses |
| | slk_attr_set.3xcurses | See slk_attroff.3xcurses |
| | slk_attrset.3xcurses | See slk_attroff.3xcurses |
| | slk_clear.3curses | See curs_slk.3curses |
| | slk_clear.3xcurses | See slk_attroff.3xcurses |
| | slk_color.3xcurses | See slk_attroff.3xcurses |
| | slk_init.3curses | See curs_slk.3curses |
| | slk_init.3xcurses | See slk_attroff.3xcurses |
| | slk_label.3curses | See curs_slk.3curses |
| | slk_label.3xcurses | See slk_attroff.3xcurses |
| | slk_noutrefresh.3curses | See curs_slk.3curses |
| | slk_noutrefresh.3xcurses | See slk_attroff.3xcurses |
| | slk_refresh.3curses | See curs_slk.3curses |
| | slk_refresh.3xcurses | See slk_attroff.3xcurses |
| | slk_restore.3curses | See curs_slk.3curses |
| | slk_restore.3xcurses | See slk_attroff.3xcurses |
| | slk_set.3curses | See curs_slk.3curses |
| | slk_set.3xcurses | See slk_attroff.3xcurses |
| | slk_touch.3curses | See curs_slk.3curses |
| | slk_touch.3xcurses | See slk_attroff.3xcurses |
| | slk_wset.3xcurses | See slk_attroff.3xcurses |
| | slp.7p | Service Location Protocol |
| | slp_api.3slp | Service Location Protocol Application Programming Interface |
| | SLPClose.3slp | close an open SLP handle |
| | slp.conf.4 | configuration file for Service Location Protocol agents |
| | slpd.1m | Service Location Protocol Daemon |
| | SLPDelAttrs.3slp | delete attributes |
| | SLPDereg.3slp | deregister the SLP advertisement |
| | slpd.reg.4 | serialized registration file for the service location protocol daemon (slpd) |
| | SLPEscape.3slp | escapes SLP reserved characters |
| | SLPFindAttrs.3slp | return service attributes |
| | SLPFindScopes.3slp | return list of configured and discovered scopes |
| | SLPFindSrvs.3slp | return service URLs |
| | SLPFindSrvTypes.3slp | find service types |
| | SLPFree.3slp | frees memory |
| | SLPGetProperty.3slp | return SLP configuration property |
| | SLPGetRefreshInterval.3slp | return the maximum allowed refresh interval |
| | SLPOpen.3slp | open an SLP handle |
| | SLPParseSrvURL.3slp | parse service URL |
| | SLPReg.3slp | register an SLP advertisement |
| | SLPSetProperty.3slp | set an SLP configuration property |
| | slp_strerror.3slp | map SLP error codes to messages |
| | SLPUnescape.3slp | translate escaped characters into UTF-8 |
| | smart2cfg.1 | Compaq Smart-2 EISA/PCI and Smart-2SL PCI Array Controller ioctl utility |
| | smartcard.1m | configure and administer a smart card |
| | smartcard.5 | overview of smart card features on Solaris |
| | smattrpop.1m | populate security attribute databases in a name service |
| | smbus.7d | System Management Bus controller driver |
| | smc.1m | start the Solaris Management Console |
| | smccompile.1m | build class list and compile Solaris Management Console service beans for remote use |
| | smcconf.1m | configure the Solaris Management Console |
| | smcregister.1m | configure the Solaris Management Console |
| | smcron.1m | manage jobs in the crontab database |
| | smcwebserver.1m | start the Sun Management Center console web server |
| | smdiskless.1m | manage diskless client support for a server |
| | smexec.1m | manage entries in the exec_attr database |
| | smgroup.1m | manage group entries |
| | smlog.1m | manage and view WBEM log files |
| | smmaillist.1m | manage email alias entries |
| | smmultiuser.1m | manage bulk operations on user accounts |
| | smosservice.1m | manage OS services |
| | smpatch.1m | manage patches |
| | smprofile.1m | manage profiles in the prof_attr and exec_attr databases |
| | smrole.1m | manage roles and users in role accounts |
| | smrsh.1m | restricted shell for sendmail |
| | smserialport.1m | manage serial port |
| | smuser.1m | manage user entries |
| | snca.1 | See nca.1 |
| | snmpdx.1m | Sun Solstice Enterprise Master Agent |
| | snmpXdmid.1m | Sun Solstice Enterprise SNMP-DMI mapper subagent |
| | snmpXwbemd.1m | SNMP Adapter Subagent for WBEM |
| | snoop.1m | capture and inspect network packets |
| | snprintf.3c | See printf.3c |
| | snprintf.9f | See sprintf.9f |
| | soc.7d | Serial Optical Controller (SOC) device driver |
| | socal.7d | Serial Optical Controller for Fibre Channel Arbitrated Loop (SOC+) device driver |
| | sock2path.4 | file that maps sockets to transport providers |
| | socket.3head | Internet Protocol family |
| | socket.3socket | create an endpoint for communication |
| | socket.3xnet | create an endpoint for communication |
| | socketpair.3socket | create a pair of connected sockets |
| | socketpair.3xnet | create a pair of connected sockets |
| | sockio.7i | ioctls that operate directly on sockets |
| | soconfig.1m | configure transport providers for use by sockets |
| | soelim.1 | resolve and eliminate .so requests from nroff or troff input |
| | soladdapp.1m | add an application to the Solstice application registry |
| | solbook.5 | See sgml.5 |
| | soldelapp.1m | remove an application from the Solstice application registry |
| | solregis.1 | Solaris user registration |
| | solstice.1m | access system administration tools with a graphical user interface |
| | sort.1 | sort, merge, or sequence check text files |
| | sortbib.1 | sort a bibliographic database |
| | sotruss.1 | trace shared library procedure calls |
| | source.1 | See exec.1 |
| | space.3plot | See plot.3plot |
| | space.4 | disk space requirement file |
| | sparc.1 | See machid.1 |
| | __sparc_utrap_install.2 | install a SPARC V9 user trap handler |
| | spell.1 | report spelling errors |
| | spellin.1 | See spell.1 |
| | spline.1 | interpolate smooth curve |
| | split.1 | split a file into pieces |
| | sppptun.1m | PPP tunneling driver utility |
| | sppptun.7m | PPP tunneling pseudo-driver |
| | spray.1m | spray packets |
| | spray.3socket | scatter data in order to test the network |
| | sprayd.1m | See rpc.sprayd.1m |
| | sprintf.3c | See printf.3c |
| | sprintf.3ucb | See printf.3ucb |
| | sprintf.9f | format characters in memory |
| | spwr.7d | SMC EtherPower II 10/100 (9432) Ethernet device driver |
| | sqrt.3m | square root function |
| | srand.3c | See rand.3c |
| | srand.3ucb | See rand.3ucb |
| | srand48.3c | See drand48.3c |
| | srandom.3c | See random.3c |
| | srchtxt.1 | display contents of, or search for a text string in, message data bases |
| | srv.9e | service queued messages |
| | ssaadm.1m | administration program for SPARCstorage Array and SPARCstorage RSM disk systems |
| | SSAAgentIsAlive.3snmp | Sun Solstice Enterprise Agent registration and communication helper functions |
| | SSAGetTrapPort.3snmp | See SSAAgentIsAlive.3snmp |
| | SSAOidCmp.3snmp | Sun Solstice Enterprise Agent OID helper functions |
| | SSAOidCpy.3snmp | See SSAOidCmp.3snmp |
| | SSAOidDup.3snmp | See SSAOidCmp.3snmp |
| | SSAOidFree.3snmp | See SSAOidCmp.3snmp |
| | SSAOidInit.3snmp | See SSAOidCmp.3snmp |
| | SSAOidNew.3snmp | See SSAOidCmp.3snmp |
| | SSAOidString.3snmp | See SSAOidCmp.3snmp |
| | SSAOidStrToOid.3snmp | See SSAOidCmp.3snmp |
| | SSAOidZero.3snmp | See SSAOidCmp.3snmp |
| | SSARegSubagent.3snmp | See SSAAgentIsAlive.3snmp |
| | SSARegSubtable.3snmp | See SSAAgentIsAlive.3snmp |
| | SSARegSubtree.3snmp | See SSAAgentIsAlive.3snmp |
| | SSASendTrap.3snmp | See SSAAgentIsAlive.3snmp |
| | SSAStringCpy.3snmp | Sun Solstice Enterprise Agent string helper functions |
| | SSAStringInit.3snmp | See SSAStringCpy.3snmp |
| | SSAStringToChar.3snmp | See SSAStringCpy.3snmp |
| | SSAStringZero.3snmp | See SSAStringCpy.3snmp |
| | SSASubagentOpen.3snmp | See SSAAgentIsAlive.3snmp |
| | sscanf.3c | See scanf.3c |
| | ssd.7d | driver for SPARCstorage Array and Fibre Channel Arbitrated Loop disk devices |
| | ssh.1 | OpenSSH secure shell client (remote login program) |
| | ssh-add.1 | add RSA or DSA identities for the authentication agent |
| | ssh-agent.1 | authentication agent |
| | ssh_config.4 | ssh configuration file |
| | sshd.1m | secure shell daemon |
| | sshd_config.4 | sshd configuration file |
| | ssh-http-proxy-connect.1 | Secure Shell proxy for HTTP |
| | ssh-keygen.1 | authentication key generation |
| | ssh-socks5-proxy-connect.1 | Secure Shell proxy for SOCKS5 |
| | ssignal.3c | software signals |
| | st.7d | driver for SCSI tape devices |
| | stability.5 | See attributes.5 |
| | stack_getbounds.3c | retrieve stack boundaries |
| | _stack_grow.3c | express an intention to extend the stack |
| | stack_inbounds.3c | determine if address is within stack boundaries |
| | stack_setbounds.3c | update stack boundaries |
| | stack_violation.3c | determine stack boundary violation event |
| | standards.5 | standards and specifications supported by Solaris |
| | standend.3curses | See curs_attr.3curses |
| | standend.3xcurses | set/clear window attributes |
| | standout.3curses | See curs_attr.3curses |
| | standout.3xcurses | See standend.3xcurses |
| | start_color.3curses | See curs_color.3curses |
| | start_color.3xcurses | See can_change_color.3xcurses |
| | startup.1m | See acctsh.1m |
| | stat.2 | get file status |
| | stat.3head | data returned by stat system call |
| | statd.1m | network status monitor |
| | statvfs.2 | get file system information |
| | stc.7d | Serial Parallel Communications driver for SBus |
| | stdarg.3head | handle variable argument list |
| | stdio.3c | standard buffered input/output package |
| | stdscr.3xcurses | default window |
| | step.3gen | See regexpr.3gen |
| | step.5 | See regexp.5 |
| | sticky.5 | mark files for special treatment |
| | stime.2 | set system time and date |
| | stoi.9f | convert between an integer and a decimal string |
| | stop.1 | See jobs.1 |
| | store.3ucb | See dbm.3ucb |
| | stp4020.7d | STP 4020 PCMCIA Adapter |
| | str2sig.3c | translation between signal name and signal number |
| | str.3gen | See strfind.3gen |
| | strace.1m | print STREAMS trace messages |
| | strategy.9e | perform block I/O |
| | strcadd.3gen | See strccpy.3gen |
| | strcasecmp.3c | See string.3c |
| | strcasecmp.9f | See strcmp.9f |
| | strcat.3c | See string.3c |
| | strccpy.3gen | copy strings, compressing or expanding escape codes |
| | strchg.1 | change or query stream configuration |
| | strchr.3c | See string.3c |
| | strchr.9f | find a character in a string |
| | strclean.1m | STREAMS error logger cleanup program |
| | strcmp.3c | See string.3c |
| | strcmp.9f | compare two null-terminated strings. |
| | strcoll.3c | string collation |
| | strconf.1 | See strchg.1 |
| | strcpy.3c | See string.3c |
| | strcpy.9f | copy a string from one location to another. |
| | strcspn.3c | See string.3c |
| | strdup.3c | See string.3c |
| | streadd.3gen | See strccpy.3gen |
| | streamio.7i | STREAMS ioctl commands |
| | streamtab.9s | STREAMS entity declaration structure |
| | strecpy.3gen | See strccpy.3gen |
| | strerr.1m | STREAMS error logger daemon |
| | strerror.3c | get error message string |
| | strfind.3gen | string manipulations |
| | strfmon.3c | convert monetary value to string |
| | strftime.3c | convert date and time to string |
| | string.3c | string operations |
| | strings.1 | find printable strings in an object or binary file |
| | string_to_decimal.3c | parse characters into decimal record |
| | strip.1 | strip symbol table, debugging and line number information from an object file |
| | strlcat.3c | See string.3c |
| | strlcpy.3c | See string.3c |
| | strlen.3c | See string.3c |
| | strlen.9f | determine the number of non-null bytes in a string |
| | strlog.9f | submit messages to the log driver |
| | strncasecmp.3c | See string.3c |
| | strncasecmp.9f | See strcmp.9f |
| | strncat.3c | See string.3c |
| | strncmp.3c | See string.3c |
| | strncmp.9f | See strcmp.9f |
| | strncpy.3c | See string.3c |
| | strncpy.9f | See strcpy.9f |
| | stroptions.9s | options structure for M_SETOPTS message |
| | strpbrk.3c | See string.3c |
| | strptime.3c | date and time conversion |
| | strqget.9f | get information about a queue or band of the queue |
| | strqset.9f | change information about a queue or band of the queue |
| | strrchr.3c | See string.3c |
| | strrchr.9f | See strchr.9f |
| | strrspn.3gen | See strfind.3gen |
| | strsignal.3c | get name of signal |
| | strspn.3c | See string.3c |
| | strstr.3c | See string.3c |
| | strtod.3c | convert string to double-precision number |
| | strtok.3c | See string.3c |
| | strtok_r.3c | See string.3c |
| | strtol.3c | string conversion routines |
| | strtoll.3c | See strtol.3c |
| | strtoul.3c | convert string to unsigned long |
| | strtoull.3c | See strtoul.3c |
| | strtows.3c | code conversion for Process Code and File Code |
| | strtrns.3gen | See strfind.3gen |
| | STRUCT_BUF.9f | See STRUCT_DECL.9f |
| | STRUCT_DECL.9f | 32-bit application data access macros |
| | STRUCT_FADDR.9f | See STRUCT_DECL.9f |
| | STRUCT_FGET.9f | See STRUCT_DECL.9f |
| | STRUCT_FGETP.9f | See STRUCT_DECL.9f |
| | STRUCT_FSET.9f | See STRUCT_DECL.9f |
| | STRUCT_FSETP.9f | See STRUCT_DECL.9f |
| | STRUCT_HANDLE.9f | See STRUCT_DECL.9f |
| | STRUCT_INIT.9f | See STRUCT_DECL.9f |
| | STRUCT_SET_HANDLE.9f | See STRUCT_DECL.9f |
| | STRUCT_SIZE.9f | See STRUCT_DECL.9f |
| | strxfrm.3c | string transformation |
| | stty.1b | set the options for a terminal |
| | stty.1 | set the options for a terminal |
| | sttydefs.1m | maintain line settings and hunt sequences for TTY ports |
| | su.1m | become superuser or another user |
| | su.7d | asynchronous serial port driver |
| | subpad.3curses | See curs_pad.3curses |
| | subpad.3xcurses | See newpad.3xcurses |
| | subwin.3curses | See curs_window.3curses |
| | subwin.3xcurses | See derwin.3xcurses |
| | sulog.4 | su command log file |
| | sulogin.1m | access single-user mode |
| | sum.1b | calculate a checksum for a file |
| | sum.1 | print checksum and block count for a file |
| | sun.1 | See machid.1 |
| | suninstall.1m | install the Solaris environment |
| | SUNWafb_config.1m | See afbconfig.1m |
| | SUNWffb_config.1m | See ffbconfig.1m |
| | SUNWgfb_config.1m | fbconfig module for configuring Sun XVR-1000 Graphics Accelerator |
| | SUNWifb_config.1m | configure the Sun Expert3D Graphics Accelerator |
| | SUNWm64_config.1m | See m64config.1m |
| | SUNWpfb_config.1m | fbconfig module for configuring Sun XVR-100 Graphics Accelerator |
| | SUNWzulu_config.1m | fbconfig module for configuring SunXVR-4000 Graphics Accelerator |
| | SUS.5 | See standards.5 |
| | suspend.1 | shell built-in function to halt the current shell |
| | SUSv2.5 | See standards.5 |
| | svc_add_input.3nsl | See rpc_svc_input.3nsl |
| | svc_auth_reg.3nsl | See rpc_svc_reg.3nsl |
| | svc_control.3nsl | See rpc_svc_create.3nsl |
| | svc_create.3nsl | See rpc_svc_create.3nsl |
| | svc_destroy.3nsl | See rpc_svc_create.3nsl |
| | svc_dg_create.3nsl | See rpc_svc_create.3nsl |
| | svc_dg_enablecache.3nsl | See rpc_svc_calls.3nsl |
| | svc_done.3nsl | See rpc_svc_calls.3nsl |
| | svc_door_create.3nsl | See rpc_svc_create.3nsl |
| | svcerr_auth.3nsl | See rpc_svc_err.3nsl |
| | svcerr_decode.3nsl | See rpc_svc_err.3nsl |
| | svcerr_noproc.3nsl | See rpc_svc_err.3nsl |
| | svcerr_noprog.3nsl | See rpc_svc_err.3nsl |
| | svcerr_progvers.3nsl | See rpc_svc_err.3nsl |
| | svcerr_systemerr.3nsl | See rpc_svc_err.3nsl |
| | svcerr_weakauth.3nsl | See rpc_svc_err.3nsl |
| | svc_exit.3nsl | See rpc_svc_calls.3nsl |
| | svcfd_create.3nsl | See rpc_soc.3nsl |
| | svc_fd_create.3nsl | See rpc_svc_create.3nsl |
| | svc_fds.3nsl | See rpc_soc.3nsl |
| | svc_fdset.3nsl | See rpc_svc_calls.3nsl |
| | svc_freeargs.3nsl | See rpc_svc_calls.3nsl |
| | svc_getargs.3nsl | See rpc_svc_calls.3nsl |
| | svc_getcaller.3nsl | See rpc_soc.3nsl |
| | svc_getreq.3nsl | See rpc_soc.3nsl |
| | svc_getreq_common.3nsl | See rpc_svc_calls.3nsl |
| | svc_getreq_poll.3nsl | See rpc_svc_calls.3nsl |
| | svc_getreqset.3nsl | See rpc_svc_calls.3nsl |
| | svc_getrpccaller.3nsl | See rpc_svc_calls.3nsl |
| | svc_max_pollfd.3nsl | See rpc_svc_calls.3nsl |
| | svc_pollfd.3nsl | See rpc_svc_calls.3nsl |
| | svcraw_create.3nsl | See rpc_soc.3nsl |
| | svc_raw_create.3nsl | See rpc_svc_create.3nsl |
| | svc_reg.3nsl | See rpc_svc_reg.3nsl |
| | svc_register.3nsl | See rpc_soc.3nsl |
| | svc_remove_input.3nsl | See rpc_svc_input.3nsl |
| | svc_run.3nsl | See rpc_svc_calls.3nsl |
| | svc_sendreply.3nsl | See rpc_svc_calls.3nsl |
| | svctcp_create.3nsl | See rpc_soc.3nsl |
| | svc_tli_create.3nsl | See rpc_svc_create.3nsl |
| | svc_tp_create.3nsl | See rpc_svc_create.3nsl |
| | svcudp_bufcreate.3nsl | See rpc_soc.3nsl |
| | svcudp_create.3nsl | See rpc_soc.3nsl |
| | svc_unreg.3nsl | See rpc_svc_reg.3nsl |
| | svc_unregister.3nsl | See rpc_soc.3nsl |
| | svc_vc_create.3nsl | See rpc_svc_create.3nsl |
| | SVID3.5 | See standards.5 |
| | SVID.5 | See standards.5 |
| | swab.3c | swap bytes |
| | swab.9f | swap bytes in 16-bit halfwords |
| | swap.1m | swap administrative interface |
| | swapcontext.3c | See makecontext.3c |
| | swapctl.2 | manage swap space |
| | switch.1 | See shell_builtins.1 |
| | swmtool.1m | install, upgrade, and remove software packages |
| | swprintf.3c | See fwprintf.3c |
| | swscanf.3c | See fwscanf.3c |
| | sxconfig.1m | configure contiguous memory for the SX video subsystem |
| | sxp.7d | Rockwell 2200 SNAP Streams Driver |
| | symhisl.7d | symhisl SCSI Host Bus Adapter Driver |
| | symlink.2 | make a symbolic link to a file |
| | symorder.1 | rearrange a list of symbols |
| | sync.1m | update the super block |
| | sync.2 | update super block |
| | syncinit.1m | set serial line interface operating parameters |
| | sync_instruction_memory.3c | make modified instructions executable |
| | synclist.4 | list of files to be synchronized when changing from one boot environment to another |
| | syncloop.1m | synchronous serial loopback test program |
| | syncok.3curses | See curs_window.3curses |
| | syncok.3xcurses | synchronize window with its parents or children |
| | syncstat.1m | report driver statistics from a synchronous serial link |
| | sysbus.4 | device tree properties for ISA and EISA bus device drivers |
| | syscall.3ucb | indirect system call |
| | sysconf.3c | get configurable system variables |
| | sysdef.1m | output system definition |
| | syseventadm.1m | sysevent event specification administration |
| | sysevent_bind_handle.3sysevent | bind or unbind subscriber handle |
| | syseventconfd.1m | kernel system event command invocation daemon |
| | syseventd.1m | kernel system event notification daemon |
| | sysevent_free.3sysevent | free memory for sysevent handle |
| | sysevent_get_attr_list.3sysevent | get attribute list pointer |
| | sysevent_get_class_name.3sysevent | get class name, subclass name, ID or buffer size of event |
| | sysevent_get_event_id.3sysevent | See sysevent_get_class_name.3sysevent |
| | sysevent_get_pid.3sysevent | See sysevent_get_vendor_name.3sysevent |
| | sysevent_get_pub_name.3sysevent | See sysevent_get_vendor_name.3sysevent |
| | sysevent_get_size.3sysevent | See sysevent_get_class_name.3sysevent |
| | sysevent_get_subclass_name.3sysevent | See sysevent_get_class_name.3sysevent |
| | sysevent_get_vendor_name.3sysevent | get vendor name, publisher name or processor ID of event |
| | sysevent_post_event.3sysevent | post system event for applications |
| | sysevent_subscribe_event.3sysevent | register or unregister interest in event receipt |
| | sysevent_unbind_handle.3sysevent | See sysevent_bind_handle.3sysevent |
| | sysevent_unsubscribe_event.3sysevent | See sysevent_subscribe_event.3sysevent |
| | sysfs.2 | get file system type information |
| | sysidcfg.4 | system identification configuration file |
| | sysidconfig.1m | execute system configuration applications, or define set of system configuration applications |
| | sysidnet.1m | See sysidtool.1m |
| | sysidns.1m | See sysidtool.1m |
| | sysidpm.1m | See sysidtool.1m |
| | sysidroot.1m | See sysidtool.1m |
| | sysidsys.1m | See sysidtool.1m |
| | sysidtool.1m | system configuration |
| | sysinfo.2 | get and set system information strings |
| | syslog.3c | control system log |
| | syslog.conf.4 | configuration file for syslogd system log daemon |
| | syslogd.1m | log system messages |
| | sysmsg.7d | system message routing to console devices |
| | sys_siglist.3ucb | See psignal.3ucb |
| | system.3c | issue a shell command |
| | system.4 | system configuration information file |
| | sys-unconfig.1m | undo a system's configuration |
| | sysV-make.1 | maintain, update, and regenerate groups of programs |