SunOS man pages


sun.com \| docs.sun.com		How To Buy \| My Sun \| Worldwide Sites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
OPERANDS
EXAMPLES
EXIT STATUS
ATTRIBUTES
SEE ALSO

NAME

install_scripts, add_install_client, add_to_install_server, modify_install_server, rm_install_client, setup_install_server, check - scripts used to install the Solaris software

SYNOPSIS

cdrom-mnt-pt/Solaris_XX/Tools/add_install_client [-i IP_address] [-e Ethernet_address] [ -s server_name : path] [ -c server_name : path] [ -n [server ] : name_service [ ( netmask] ] [ -p server_name : path] [-f boot_file_name] host_name platform_group

cdrom-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server_name:path] [-c server_name:path] [-p server_name:path] [-t install_boot_image_path] [-f boot_file_name] platform_name platform_group

cdrom-mnt-pt/Solaris_XX/Tools/add_to_install_server [-s] [-p product_image_path] install_server_path

cdrom-mnt-pt/Solaris_XX/Tools/jumpstart_sample/check [-p install_dir_path] [-r rulesfile]

cdrom-mnt-pt/modify_install_server [-p] install_dir_path installer_miniroot_path

cdrom-mnt-pt/Solaris_XX/Tools/rm_install_client host_name

cdrom-mnt-pt/Solaris_XX/Tools/setup_install_server [-b] [-t install_boot_image_path] [-w wanboot_image_path] install_dir_path

DESCRIPTION

These commands are located on slice 0 of the Solaris Software and Solaris Installer CDs. If the Solaris CD has been copied to a local disk, cdrom_mnt_pt is the path to the copied Solaris CD. They can be used for a variety of installation tasks.

The XX in Solaris_XX is the version number of the Solaris release being used.

There are three versions of the add_install_client command. See SYNOPSIS.

Use the following version of the add_install_client command to add clients for network installation (these commands update the bootparams(4) file). The add_install_client command must be run from the install server's Solaris installation image (a mounted Solaris CD or a Solaris CD copied to disk) or the boot server's boot directory (if a boot server is required). The Solaris installation image or the boot directory must be the same Solaris release that you want installed on the client.

cdrom-mnt-pt/Solaris_XX/Tools/add_install_client [-i IP_address] [-e Ethernet_address] [ -s server_name : path] [ -c server_name : path] [ -n [server ] : name_service [ ( netmask] ] [ -p server_name : path] host_name platform_group

Use the following version of the add_install_client command to add support for instances of a platform within a platform group to the install server. This group will be booted and configured using DHCP. The script will perform the necessary configuration steps on the server, and prints the data that the user needs to add to the DHCP server for the group.

cdrom-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server:path] [-c server:path] [-p server:path] [-t install boot image path] [-f boot file name] platform_name platform_group

Use the following version of the add_install_client command to add a single client to the install server. This client will be booted and configured using DHCP. The script will perform the necessary configuration steps on the server, and will print the data that the user needs to add to the DHCP server for the client. The -f flag used above needs to be added to the existing usage as well. -f allows the user to specify a boot file name to be used for a given client.

cdrom-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server_name:path] [-c server_name:path] [-p server_name:path] [-t install_boot_image_path] [-f boot_file_name] -e Ethernet_address [-b property=value] platform_group

Always use the -d option when registering x86 Architecture Pre-boot eXecution Environment (PXE) clients. These clients use DHCP for their configuration.

Use add_to_install_server to merge other Solaris CDs with an existing image on a Net Install Server. Each CD that can be merged (currently OS CD 2, and the Language CD) has its own add_to_install_server script. Do not use add_to_install_server scripts with CDs other than the ones with which they were delivered.

Use check to validate the rules in a rules file (this is only necessary if a custom JumpStart installation is being set up).

Use modify_install_server to replace an existing net install server's miniroot with a Solaris Installation CD's miniroot. This will change the net install server's install time user interface over to the Solaris Installation CD's Web Start user interface.

An existing install image (created using setup_install_server) must exist prior to using the modify_install_server command.

Use rm_install_client to remove clients for network installation (these commands update the bootparams(4) file).

Use setup_install_server to copy the Solaris CD to a disk (to set up an install server), to build a WANboot miniroot image (to set up a WANboot install server), or to copy just the boot software of the Solaris CD to a disk (to set up a boot server). An install server is required to install clients over the network. A boot server is also required for network installations if the install server and clients to be installed are on different subnets (the boot server must be located on the client's subnet).

OPTIONS

The add_install_client supports the following options:

-b property=value

Set a property value in the client specific bootenv.rc file located on the boot server's TFTP directory, /tftpboot by default. Use this option to set boot properties that are specific to this client. You can use the bootpath property to automate the selection of the boot device instead of manually using the Device Configuration Assistant. You can use the boot-args property to automatically select a jumpstart installation. See eeprom(1M).

You can only use this option to the x86 client. You should only use this option in conjunction with the -d and -e options.

-c server_name:path

This option is required only to specify a JumpStart directory for a custom JumpStart installation. server_name is the host name of the server with a JumpStart directory. path is the absolute path to the JumpStart directory.

-d

Specify as a DHCP client.

-e Ethernet_address

Specify the Ethernet address of the system to be installed.

-f

Specify the boot_file_name of the client to be installed.

-i IP_address

Specify the IP address of the client to be installed.

-n [server]:name_service[(netmask)]

This option specifies which name service should be used during system configuration. This sets the ns keyword in the bootparams(4) file.

name_service: Valid entries are nis, nisplus, and none.
netmask: A series of four numbers separated by periods, specifying which portion of an IP address is the network part, and which is the host part.
server: The name of the server or IP address of the specified name service. If the server specified is on a different subnet, then the netmask may be needed to enable the client to contact the server.

-p server_name:path

This option is the location of the user-defined sysidcfg file for pre-configuring system or network information. server_name is either a valid host name or IP address. path is the absolute path to the Jumpstart directory.

-s server_name:path

This option is required only when using add_install_client from a boot server. Specify the name of the server and the absolute path of the Solaris installation image that will be used for this installation. path is either the path to a mounted Solaris CD or a path to a directory with a copy of the Solaris CD.

The add_to_install_server command supports the following options:

-p: Specifies the location of the CD (containing the supplemental products) to be copied.
-s: Allows users to select from a list only the products needing installation.

The check command supports the following options:

-p install_dir_path: Validates the rules file by using the check script from a specified Solaris installation image, instead of the check script from the system you are using. install_dir_path is the path to a Solaris installation image on a local disk or a mounted Solaris CD.

Use this option to run the most recent version of check if your system is running a previous version of Solaris.
-r rulesfile: Specifies a rules file other than the one named rules. Using this option, the validity of a rule can be tested before integrating it into the rules file. check will report whether or not the rule is valid, but it will not create the rules.ok file necessary for a custom JumpStart installation.

The modify_install_server command supports the following options:

-p: This option preserves the existing images miniroot in install_dir_path/Solaris_XX/Tools/Boot.orig.

The setup_install_servercommand supports the following options:

-b: This option sets up the server only as a boot server.
-t: This option allows an alternate miniroot to be specified.
-w: This option builds a WANboot miniroot image.

OPERANDS

The add_install_client command supports the following options:

host_name

This is the name of the client to be installed.

platform_group

Vendor-defined grouping of hardware platforms for the purpose of distributing specific software. Examples of valid platform groups are:

System	Platform Group
x86	i86pc
Sun Fire 4800	sun4u

Use the uname(1) command (with the -m option) to determine a system's platform group.

platform_name

Use the uname(1) command (with the -i option) to determine a system's platform name.

The following example shows the use of the uname command to determine the system platform name for an Ultra 1:

uname -i

The system responds with:

SUNW,Ultra-1

Therefore, the system's platform name is SUNW,Ultra1.

The following command calls add_install_client for Ultra 1s:

add_install_client -d SUNW,Ultra-1 sun4u

For IA32 platforms, the platform name is always SUNW.i86pc.

The following command calls add_install_client for IA32 platforms:

add_install_client -d SUNW.i86pc i86pc

The rm_install_client command supports the following operands:

host_name: This is the name of the client to be removed.

The setup_install_server command supports the following operands:

install_dir_path: The absolute path of the directory in which the Solaris software is to be copied. The directory must be empty.
wanboot_image_path: The absolute path of the directory in which the file containing the WANboot miniroot image is to be created.

EXAMPLES

Example 1. Using add_install_client

The following add_install_client commands add clients for network installation from a mounted Solaris CD on an install server on Solaris 9:

example# cd /cdrom/cdrom0/s0/Solaris_9/Tools
example# ./add_install_client system_2/sun4u

Example 2. Using add_install_client

The following add_install_client commands add clients for network installation from a mounted Solaris CD on an install server. The -c option specifies a server and path to a JumpStart directory that has a rules file and a profile file for performing a custom JumpStart installation. Also, the Solaris CD has been copied to the /export/install directory on Solaris 9:

example# cd /export/install/Solaris_9/Tools example# /add_install_client -c install_server:/jumpstart system_1 i86pc example# ./add_install_client -c install_server:/jumpstart system_2 i86pc

Example 3. Using add_install_client

The following add_install_client command adds support for a specific sun4u platform machine (8:0:20:99:88:77) using the boot file: sun4u.solaris8.

example# add_install_client -d -f sun4u.solaris8 -e 8:0:20:99:88:77 sun4u

Example 4. Using add_install_client

The following add_install_client command adds x86 clients that use the PXE standard for network booting:

example# add_install_client -d -s svrname:/mnt/export/root SUNW.i86pc i86p

Example 5. Using add_to_install_server

The following add_to_install_server command copies the packages in all the CD's products directories to an existing install server on Solaris 9:

example# cd /cdrom/cdrom0/s0 example# ./add_to_install_server /export/Solaris_9

Example 6. Using check

The following check command validates the syntax of the rules file used for a custom JumpStart installation:

example# cd jumpstart_dir_path example# ./check -p /cdrom/cdrom0/s0

Example 7. Using modify_install_server

The following modify_install_server command moves the miniroot created using the above setup_install_server to Boot.orig and replaces it with the miniroot on the Solaris Installer CD.

example# cd /cdrom/cdrom0/s0 example# ./modify_install_server -p /export/install /cdrom/cdrom0/s1

Example 8. Using modify_install_server

The following modify_install_server command replaces the miniroot created using the above setup_install_server with the miniroot on the Solaris Installer CD.

example# cd /cdrom/cdrom0/s0 example# ./modify_install_server /export/install /cdrom/cdrom0/s1

Example 9. Using rm_install_client

The following rm_install_client commands remove clients for network installation on Solaris 9:

example# cd /export/install/Solaris_9/Tools example# ./rm_install_client holmes example# ./rm_install_client watson

Example 10. Using setup_install_server

The following setup_install_server command copies the mounted Solaris CD to a directory named /export/install on the local disk on Solaris 9:

example# cd /cdrom/cdrom0/s0/Solaris_9/Tools example# ./setup_install_server /export/install

Example 11. Using setup_install_server

The following setup_install_server command copies the boot software of a mounted Solaris CD to a directory named /boot_dir on a system that is going to be a boot server for a subnet on Solaris 9:

example# cd /cdrom/cdrom0/s0/Solaris_9/Tools example# ./setup_install_server -b /boot_dir

Example 12. Using setup_install_server

By default, setup_install_server will look for an installation boot directory at the Solaris ../Tools/Boot location of the mount Solaris distribution disc.

If an alternate boot directory is required, such as one saved on a > network boot server by way of an earlier ./setup_install_server -b /boot_dir command, the -t option can be used.

example# cd /cdrom/cdrom0/s0/Solairs_9/Tools example# ./setup_install_server -t /boot_dir /export/install

Example 13. Using setup_install_server with WANboot Option

The following setup_install_server command creates an image of the WANboot miniroot file systemand stores it in the file /wanboot_dir/miniroot.

example# cd /cdrom/cdrom0/s0/Solairs_9/Tools example# ./setup_install_server -w /wanboot_dir /export/install

Example 14. x86: Specifying a Serial Console to Use During a Network Installation (CDs)

The following example illustrates how to add an x86 install client to an install server and specify a serial console to use during the installation. This example sets up the install client in the following manner:

The -d option indicates that the client is set up to use DHCP to set installation parameters.
The -e option indicates that this installation occurs only on the client with the ethernet address 00:07:e9:04:4a:bf.
The first and second uses of the -b option instruct the installation program to use the serial port ttya as an input and an output device.

install server# cd /export/boot/Solaris_9/Tools
install server# ./add_install_client -d -e "00:07:e9:04:4a:bf" \
     -b "input-device=ttya" -b "output-device=ttya" \
     i86pc

For a complete description of the boot property variables and values you can use with the -b option, see eeprom(1M).

Example 15. Specifying a Boot Device to Use During a Network Installation (CDs)

The following example illustrates how to add an x86 install client to an install server and specify a boot device to use during the installation. If you specify the boot device when you set up the install client, you are not prompted for this information by the Device Configuration Assistant during the installation.

This example sets up the install client in the following manner:

The -d option indicates that the client is set up to use DHCP to set installation parameters
The -e option indicates that this installation occurs only on the client with the ethernet address 00:07:e9:04:4a:bf.
The first and second uses of the -b option instruct the installation program to use the serial port ttya as an input and an output device.
The third use of the -b option instructs the installation program to use a specific boot device during the installation.
The value of the boot device path varies based on your hardware..
The i86pc platform name indicates that the client is an x86-based system.

install server# cd /export/boot/Solaris_9/Tools
install server# ./add_install_client -d -e "00:07:e9:04:4a:bf" \
     -b "input-device=ttya" -b "output-device=ttya" \
     -b "bootpath=/pci@0,0/pci108e,16a8@8" i86pc

For a complete description of the boot property variables and values you can use with the -b option, see eeprom(1M).

EXIT STATUS

The following exit values are returned:

0: Successful completion.
1: An error has occurred.

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	Solaris CD